Ecler VEO-SWM44, Руководство пользователя

Страница: 19 / 30

19
10.2.2 CEC/RS232 Function Setting
The ending mark of command is “<CR><LF>”.
Command Function
Command & Feedback
Example
#SET_SYNCACT_CEC 1
Enable the function of automatically
sending CEC commands.
When detecting video input signal or not
detecting any video signal, the switcher
will automatically send the
corresponding CEC command to control
the display device.
@SYNCACT_CEC 1
#SET_SYNCACT_CEC 0
Disable the function of automatically
sending CEC commands.
@SYNCACT_CEC 0
#GET_SYNCACT_CEC
Get the function setting status of
automatically sending CEC commands.
@SYNCACT_CEC 1
#SET_SYNCACT_RS232
1
Enable the function of automatically
sending RS232 commands.
When detecting video input signal or not
detecting any video signal, the switcher
will automatically send the
corresponding RS232 command to
control the display device.
@SYNCACT_RS232 1
#SET_SYNCACT_RS232
0
Disable the function of automatically
sending RS232 commands.
@SYNCACT_RS232 0
#GET_SYNCACT_RS232
Get the function setting status of
automatically sending RS232
commands.
@SYNCACT_RS232 1
#SET_DISPLAY 1
Power on display device (Simultaneously
sending CEC and RS232 commands to
display device).
@DISPLAY 1
#SET_DISPLAY 0
Power off display device (Simultaneously
sending CEC and RS232 commands to
display device).
@DISPLAY 0