Ecler TRAILSB6T Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 13

Ecler TRAILSB6T Скачать руководство пользователя страница 5

5

NOTE:

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide  reasonable  protection  against  harmful  interference  when  the  equipment  is
operated  in  a  commercial  environment.  This  equipment  generates,  uses,  and  can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction  manual,  may  cause  harmful  interference  to  radio  communications.
Operation  of  this  equipment  in  a  residential  area  is  likely  to  cause  harmful
interference in which case the user will be required to correct the interference at his
own expense.

WARNING:

This product must not be discarded, under any

circumstance, as unsorted urban waste. Take to the nearest electrical
and electronic waste treatment centre.

NEEC AUDIO BARCELONA, S.L.

accepts no liability for any damage that may be

caused to people, animal or objects due to failure to comply with the warnings
above.

«
...
3
4
5
6
7
...
»

Содержание TRAILSB6T














Отзывы:

Нет отзывов