Ecler PLAYER ONE, Руководство пользователя

Страница: 44 / 155

44
Please Note
: a priority event can be useful for playing announcements, pre-recorded announcements,
emergency announcements, etc. For more information on priorities see chapter Regarding Priorities.
13.3.2 SILENCE detection event
PLAYER ONE/ PLAYER ZERO has a special event, the SILENCE detection event: absence of a real
analogue audio signal at the unit's outputs. This allows the player to continue playing the media when
the programmed audio that is being played ends, or is interrupted for any reason, which may sometimes
happen due to certain problems that may arise (loss of Internet, accidental disconnection of the network
cable, bad files, etc.): "
The show must go on ".
Figure 21: silence event configuration
• Source tab: waiting time, or trigger threshold (detection time). Select the time allowed for silence
(no audio signal) before the event is triggered.
•
Target tab : select the action that ePLAYER1 will perform when the specified waiting time has
elapsed.
o
Internal : internal stimulus. This is useful for triggering actions within a Script.
o
Preset recall: loading a preset. Select the preset you want to load when the silence event
is activated.