Ecler PLAYER ONE, Руководство пользователя

Страница: 51 / 155

51
This action may be:
1. Internal : internal stimulus (does not perform an action directly, but allows actions to be triggered
via scripts)
2. Preset recall: loading a preset
3. Transport control : pressing a button on the transport bar; STOP, PLAY, PREV, NEXT,
PLAY/PAUSE
4. Load & Play source : loading and playback of a source
5. Priority source : playback of a source with priority. The source with priority will overwrite the
source that is currently playing. When the priority announcement/message ends, the source that
was playing will start to play again.
13.4.4 Regarding priorities
Calendar events have lower priority than events that are triggered by GPI. Therefore, different degrees
of priority can be established. For example, in a shop, calendar-based events can be used to trigger voice
messages indicating an offer, while GPI events can be used to trigger an evacuation message.
In addition, there is a higher level index that determines priority if it is the case that 2 calendar-based
triggers occur at the same time. For example, CALENDAR02 is set to repeat a message every hour and
CALENDAR03 is set to repeat a message every two hours (both events have the same start time). The
messages will alternate every hour, as CALENDAR03 will take precedence over CALENDAR02.
If a calendar event is playing and then a second event comes in, the last event to arrive will overwrite the
one that is playing, regardless of their indexes.
When a priority event is playing, it can be seen on the PLAYER ONE screen. The characters PC01 indicate:
P , event with Priority; C , calendar event; and 01 , calendar index, from 01 to 24.
If this is an event triggered by a GPI, PI01 or PI02 will be shown on the screen, indicating: P , event with
Priority; I , GPI event; and 01 , GPI input index, from 01 to 02.
A r t i s t - s o n g . m p 3

0 2 : 5 6
P C 0 1 U S B
Figure 30
Please Note
: PLAYER ZERO does not have an LCD screen.