14
ratio is low (low signal). When the output amplifier raises indistinctly the whole set we
will have a very high background noise level at the output.
In the second case, when the input gain is correctly adjusted, the signal received by the
matrix is large and therefore with a large signal / noise ratio as well, so when this signal
reaches the output channels and is amplified, it will have a better ratio than in the previous
case.
7.
PACKAGE CONTENTS
•
MIMO4040CDN
•
AC power cables
•
Euroblock aerial connectors for analog inputs and outputs and GPIO ports
•
Quick User Guide and Warranty Card
8.
FUNCTION LIST
1.
Stereo jack headphone connection
2.
Headphone volume control, VOL
3.
Analog Input Signal LEDs, INPUTS
4.
Analog output signal LEDs, OUTPUTS
5.
Data traffic indicator light, DATA
6.
Digital audio traffic light Dante™, DANTE
7.
Start-up indicator light, POWER
8.
IEC type connector for external AC power cable
9.
Fuse holder
10.
Unit Power On Switch
11.
Euroblock DC voltage control terminals, GPI
12.
Euroblock relay output terminals, GPO
13.
Ports Dante™ primary and secondary, RJ
-45 connector
14.
Ethernet control port, RJ-45 connector
15.
DB9 connector for remote control via TP-NET protocol, RS-232
16.
Euroblock terminals analog audio output, MONITOR
17.
Euroblock terminals analog audio output, OUT
18.
Euroblock terminals analog audio input, IN
Содержание MIMO4040CDN
Страница 15: ...15 9 FUNCTION DIAGRAM ...
Страница 16: ...16 10 BLOCKS DIAGRAM ...
