16
4.11.2
SWITCH MODE
In this mode, only a single network connection is actually enabled
(and therefore only
one IP address exists), with the primary and secondary ports behaving as ports of a
network switch integrated within VIDA, to which devices forming part of the system's
Dante
™
network, or Ethernet switches forming part of that network's infrastructure, can
be directly connected.
In this mode both ports primary and secondary, should never be connected
simultaneously to network switches
, as this would create a loop that would cause
network conflicts and disruption of the digital audio Dante
™
traffic.
5.
START-UP and OPERATION
5.1
START UP
When the
rear panel Power switch is pressed
, the amplifier is powered and
can be
switched on, briefly holding the front ON/SLEEP button
or remotely from the VIDA web
application or with the NET protocol.
In a complete audio installation,
it is important to start up the equipment in the
following sequence
:
1.
sound sources
2.
mixer
3.
equalizers
4.
active filters
5.
processors
6.
power amplifiers.
To turn them off the sequence should follow an inverse pattern.
