10
•
RS-232
port: the serial communication port
RS-232
allows remote management
of the CA120 from a computer
through the EclerCOMM software or CA-NET
protocol from an
external control system supporting this protocol. See the
CA-NET
protocol manual for detailed information on the connection and syntax of the
commands supported. The connection has the following specifications:
o
Baud rate: 9600 (fixed, without auto negotiation)
o
Data bits: 8
o
Parity: None
o
Stop bits: 1
o
Flow control: None
•
Receiver
IR
: the built-in IR receiver gives general volume control of the CA120 and
its
MUTE ON /
OFF
function from the
REVO-IR
remote control included with the
unit.
WIRING RS-232
–
DB9
RS-232 CA120
DB9
Tx
Pin 2 (RxD)
Rx
Pin 3 (TxD)
Gnd
Pin 5 (Signal Gnd)
