11
•
Help
: gives access to the user manual, to the Ecler website, and displays the
version information of the application:
9.3 Signal generator and remote ports
The built-in signal generator can feed an input to send its signal to the DSP processing
chain in order to perform a spectral analysis and/or adjustment of parameters depending
on the acoustic characteristics of the room and equipment.
Its parameters are:
•
SIGNAL: type of signal generated, Sinewave (sine wave with a variable
frequency), Polarity (specific waveform to determine the correct polarity of the
speakers, with variable frequency), White Noise and Pink Noise.
•
FREQUENCY: frequency of the Sinewave or Polarity signal
The A and B REMOTE connectors allow you to simultaneously control the volume of one
or multiple inputs, or one or multiple outputs through a WPm series wall panel or similar
(0-10VDC).
Each preset saves the function assigned to the REMOTE ports at the time of saving (so
different presets can contain different functions for the same REMOTE port).
