9
Using the selection key (short press), you can navigate between the source
selection and the volume control. The editable option is displayed on a white
background. On the other hand, the VOL or SEL indicator will be framed and
blinking when this option is selected.
Volume control (VOL): turn the rotary encoder to change the volume of the
zone indicated on the control. Changes are applied in real time.
MUTE: press and hold the encoder for 2 seconds to enable/disable the
MUTE function in this zone.
Source selection (SEL): turn the encoder to scroll through the different
available sources
*
. No changes are made during scrolling. The name
corresponding to each source will start flashing. Press the encoder to select
the desired source and apply the change. After a few seconds without
selecting a source, the previous state is restored without any change being
applied.
*
The eMIMO1616 application determines available sources (see the eMIMO1616
web application manual for more information).
6.2 Equalization screen
The equalization screen is accessed by holding down the select key for 2 seconds.
Once on this screen, press the selection key (short press) to navigate between the
different tone controls, and adjust them as desired using the rotary encoder.
Figure 4: equalization screen
You can return to the main screen by pressing the selection key for 2 seconds.
After a few seconds without activity in this screen, the main screen returns
automatically.
Treble Control
Middle Control
Bass Control
