7
INSTALLATION
Step 1:
measure the mounting hole. It must be as the
cut-out size of the device. Pass the cable through the
cable gland. Follow steps A, B & C.
Step 2:
loose the metal plates and rise them up to
the top. Insert the back can into the mounting hole.
Step 3:
slide down the metal plates until they reach
the surface. Tight the fasteners inside the back can.
Step 4:
follow step D. Then connect the audio cable to
the loudspeaker’s terminal block. Finally, insert the
mounting springs into the hooks and push the
loudspeaker into the back can.
Содержание eIC5154
Страница 9: ...9 Mechanical diagrams Exploded view ...
Страница 10: ...10 Rear label Certification plate ...