Eckstein komponente Keyestudio KS0388, Руководство пользователя, Страница: 11 / 16

Eckstein Keyestudio
11
4) Use Method
1. AT Command Settings
When setting the AT command, you need to use an ESP8266 WIFI module .
Plug the ESP8266 WIFI onto the shield, and then connect them to your computer ’ s USB
port using a mini USB cable. Then push the shield ’ s button to Flash Boot end.
Connected successfully, open the ESP8266 debugging tool , set the baud rate to 115200,
click to open the Serial Port, and click Test the AT.
You should see the data received window will print out AT OK .
To set other AT commands, the method is similar.
You can download the ESP8266 debugging tool from the link below:
https://drive.google.com/open?id=1TS56giNcC3Jd98Rg1mNyWyq13ePnZeyQ