2
Keep cutting tools sharp and clean for better and safer performance. Follow instructions for
lubrication and changing accessories.
8. Disconnect tools
Disconnect the tool from its battery pack when not in use, before servicing and when changing
accessories such as blades.
9. Avoid unintentional starting
Do not carry the tool with a finger on the switch.
10. Stay alert
Watch what you are doing. Use common sense. Do not operate the tool when you are tired.
11. Warning
The use of any accessory or attachment, other than recommended in this instruction manual, may
present a risk of personal injury.
Ensure you only use the battery supplied with this trimmer.
Ensure that the outside surface of battery pack or tool is clean and dry before plugging into charger.
Ensure that batteries are charged using the correct charger recommended by the manufacturer and
supplied with this trimmer. Incorrect use may result in a risk of electric shock, overheating or
leakage of corrosive liquid from the battery.
12. Have your tool repaired by a qualified person
This tool is constructed in accordance with the relevant safety requirements. Qualified persons using
original spare parts should only carry out repairs; otherwise this may result in considerable danger to
the user.
13. Disposal of battery
Ensure battery is disposed of safety following local disposal guidelines in your area.
●
IMPORTANT SAFETY INSTRUCTIONS
FOR
BATTERY CHARGER
1. Before using charger, read all instructions and cautionary markings on charger, battery pack, and
product using battery pack.
2. DANGER: 230 volts present at charging terminals. Do not probe with conductive objects. Danger
of electric shock or electrocution.
3. The charger and battery are specifically designed to work together. DO NOT attempt to charge the
battery with any chargers other than the ones supplied with this product.
4. Do not expose charger to rain or snow.
5. This charger is not intended for any uses other than charging rechargeable batteries. Any other uses
may result in risk of fire, electric shock or electrocution.
6. To reduce risk of damage to electric plug and cord, disconnect from mains socket by pulling the
plug rather than the cord.
7. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to
damage or stress.
8. The charger is ventilated through slots in the top and the bottom of the housing. Do not place any
object on top of charger or on a surface that might block the ventilation slots and result in excessive
internal heat. Place the charger in position away from any heat source.
9. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any
way.
10. Do not disassemble charger. Take it to authorized service center when service or repair is required.
Incorrect reassemble may result in a risk of electric shock, electrocution or fire.
