- 4 -
●
Do not use the unit if it is damaged o
r poorly adjusted. Never remove the machine’s guard. Serious injury
to the operator or bystanders could result as well as damage to the machine.
● Inspect the area to be cut and remove all debris that could become entangled in the nylon cutting head or
cutting blade. Also remove any objects that the unit may throw during cutting.
● Keep children away. Onlookers should be kept at a safe distance from the work area, at least 15 metres
(50 feet)
● Never leave the machine unattended.
● Do not overreach. Keep proper footing and balance at all times. Do not run the unit while standing on a
ladder or on any other unstable footing location.
● Keep hands and feet clear of the nylon cutting head or blade while unit is in use.
● Do not use this type of machine for sweeping away debris.
● Do not use the unit when you are tired, ill or under the influence of medication ,drugs or alcohol.
● Use nylon cutting head which is free of damage. If a stone or any other obstacle is hit, stop the motor and
check the nylon cutting head. A broken or unbalanced nylon cutting head must never be used.
FOLLOW INSTRUCTIONS FOR CHANGING ACCESSORIES.
●
Ensure safe and proper performance of your product. These parts are available from your dealer. The
use of any other accessories or attachments may cause a potential hazard or injury to the user, damage
to the machine and void this warranty.
● Clean the machine completely, especially, the oil tank of lopper attachment , and other attachments ;.
● Stay clear of other workers or bystanders by at least 15 metres /50 feet.
Whenever approaching an operator of the machine, carefully call their attention and confirm that the
operator stops the engine. Be careful not to startle or distract the operator which can cause an unsafe
situation.
● Never touch the nylon cutting head or blade whenever the motor is running. If it is necessary to replace
the protector or cutting attachment, be sure to stop the motor and confirm that the cutting device has
stopped running. Unplug from the mains supply.
● The machine should be turned off when the machine is moved between work areas.
● Be careful not to hit the nylon cutting head against stones or the ground.
● Pay attention to loosening and overheating of parts. If necessary, have the machine serviced by an
authorized dealer. Never continue to operate a machine which may be malfunctioning.
● Never operate the machine in the rain and take special care just after the rain as the ground may be
slippery.
● If you slip or fall to the ground or into a hole, release the throttle lever immediately.
● Be careful not to drop the machine or hit it against obstacles.
● Make periodic inspections to assure safe and efficient operation. For a thorough inspection of your
machine or if in doubt, please contact a dealer.
● WARNING: The cutter area is still dangerous while the machine is coasting to a stop.
Intended use
Attention!
Depending on the attachment that is used with this device
it is only suitable for cutting
grass, hedges and branches.
Any kind of usage that is not specified in this manual is herewith
prohibited and will invalidate your guarantee. We assume no liability for personal injuries and
material damages which were caused by improper use. This machine is not designed or guaranteed
for commercial use.
IMPORTANT INSTRUCTIONS AND RECOMMENDATIONS FOR ALL APPLICATIONS
