EN
17
Circumference
OTHERS FUNCTIONS
Lcd Brightness Adjust
Low Battery Indicator
Auto Detect ( Bike1 / Bike2 )
Auto Start / Stop
1. When the low-battery icon ” ” appears on the display, it's
time to get a new battery.
2. Replace the battery with a new one when the icon blinks
on the display. Otherwise, the new data of some functions
will not be stored into the computer.
This computer is design for 2 bikes (you could purchase the
2nd set bike parts), it will automatically shift to bike 1 or bike
2 after pairing separately.
To preserve battery, this computer will automatically switch off
and just displays the CLK data when it has not been used for
about 15 minutes.
The power will be turned on automatically by riding the bike or
by pressing the button.
1. Roll the wheel until the valve stem at its lowest point
close to the ground, then mark this first point on the
ground.
2. Measure the distance between the marks in milimeters.
Enter this value to set the wheel circumference.
Option: Get a suitable circumference value from the
table.
3. Adjust the wheel circumference as the data setting
process.
4. Unit will change to the normal operation after this
circumference setting.
4 grades adjust the brightness.
To reset it you need to pull off the computer from the
bracket. Hold the C button to enter setting mode, Hold
the A button find the BRIGHTNESS SETTING.
