Echostreams OSS212F-D5, Быстрое руководство

Страница: 2 / 3

OSS212F-D5 Quick Guide
For more information please visit our website at www.echostreams.com
Copyright © 2017, Echostreams Innovative Solutions LLC. All rights reserved.
1. Remove the riser card assembly from the enclosure
2. Open the mylar top cover
3. Insert PCIe card and secure with screw
To Install 2x 2.5" OS disks, use bracket. Note
the orientation. Secure the bracket from
outside the chassis
5.
Install Motherboard Components.
For details,
refer to the motherboard user’s guide.

Support for Intel Xeon Skylake
Processor Family

Dual LGA3647

Max up to 205W TDP

Chipset PCH Intel C622

Support 8+8 DIMM slots

Up to 512GB RDIMM, 1TB LRDIMM,
2TB LRDIM 3DS

6 Channels per CPU

Populate from A0, B0, C0, D0, E0,
F0, B1, E1

Two PCIe Gen3 x24 slots

PCIE1 f/ CPU1, PCIE2 f/ CPU0

OCP2 is Gen3 x8, OCP1+2 is Gen3
x16, f/ CPU0

OCP4 is Gen3 x8, OCP3+4 is Gen3
x16, f/ CPU1
C0
B0
B1
A0
D0
E1
E0
F0
C0
B0
B1
A0
D0
E1
E0
F0
PCIE2
PCIE1
OCP 3
OCP 1
OCP 4
OCP 2
6.
Remove the Inner Rail
from the slide rail.
1 – 2 Pull the inner rails out. Pull the blue release tab when it hits a stop.
3 – 4 Keep extending inner rail and pull the white detach tab
when it hits the second stop
5 – 6 Unretract the mid rail by pulling the latch on the mid rail
1 2
3 4
5 6
7.
Install Inner Rails
to the enclosure.
Yellow circles are for standoff screws
Secure inner rail with
M4x4L screw (red)
To remove Inner rail from unit:
Pull the latch outward and remove
the keyhole from standoff
8.
Install the Outer Rails to the Rack
as follows:
Red rectangles are locations for slide
rail position (front and rear posts)
Yellow circles are location for
enclosure screws (front only)
1U
2U
Rear Bracket
Front Bracket
1 – 2 Snap the rear part of slide rail
to rear posts
3 – 4 Snap the front part of slide rail
to front posts
1 2
3 4
To remove slide rails, use the latches to undo the assembly as follows:
Rear Bracket Front Bracket
9.
Install the Unit to the Rack
as follows:
For a complete instruction on how to install unit to the rack,
please follow the Slide Rail Installation Guide.
At least two people are recommended for
mounting process.
10.
Install 2.5” Drives
to the enclosure as illustrated: