DSS224S-UN Enclosure Quick Guide
For more information please visit our website at
Copyright © 2017, Echostreams Innovative Solutions LLC. All rights reserved.
6.
Install OS disk(s)
if required as follows:
7.
Install Motherboard Components
(CPU,
heatsink, memory) using the guidelines below. For further
details, refer to the motherboard TPS.
8.
Install IO card
as guided below:
9.
Remove the Inner Rail
from the slide rail.
1 –2 Pull the inner rails out. Pull the blue release tab when it hits a stop.
3 –4 Keep extending inner rail and pull the white detach tab
when it hits the second stop
5 –6 Unretract the mid rail by pulling the latch on the mid rail
1
2
3
4
5
6
10.
Install Inner Rails
to the enclosure.
11.
Install the Outer Rails to the Rack
as follows:
To remove slide rails, use the latches to undo the assembly as follows:
Rear Bracket
Front Bracket
12.
Install the Unit to the Rack
as follows:
For a complete instruction on how to install unit to the rack,
please follow the Slide Rail Installation Guide.
At least two people are recommended for
mounting process. Insert HDDs after unit is
mounted.
