EchoStar T-105, Руководство пользователя, Страница: 10 / 28

Quick Reference Guide
Page 4 EchoStar International Corporation
© 2
004
Ec
h
o
S
ta
r I
n
te
rn
at
io
na
l
Co
rp
or
a
tio
n
A
ll ri
gh
ts
re
serve
d
4.6.
T
IMERS
1. Press the i -key.
If the InfoBanner shows the program
information:
2. Press the GUIDE
key.
3. Press the blue key and program the timer.
4. If required, select a repetition.
5. Press the green key to confirm and leave
the timer.
If the InfoBanner does not show the program
information:
2. Press the MENU key.
3. Select the Timer option.
4. Press the SELECT key.
5. Select a free timer.
6. Select Status = Enabled.
7. Select Action = Time interval.
8. Make the required settings.
9. Press the green key to confirm and leave
the timer.
10. Press the EXIT key to return to live video
CAUTION
The timer does not start or program your
video cassette recorder (VCR). You also
have to set the timer of your VCR to the
same time as on the timer. Please refer to
the user guide of your VCR how to make a
recording from an external receiver.
5.
AERIAL MYTHS
Initially, if you use an existing analogue rooftop
or loft aerial now, often there is no need to buy a
new aerial, provided the aerial is in good
condition.
However, if the current aerial or it’s cabling is in
poor condition which results in unsatisfactorily
reception, you could improve this with a new
aerial suitable for digital terrestrial reception.
You can receive excellent digital TV and Radio:
■
if the service provider delivers enough
signal (level and quality) to your area;
■
if the indoor or outdoor aerial is healthy
(aerial is clean, in good condition and
correctly aimed);
■
if the connection between the aerial and TV
set is healthy (good quality cable, 75 ohm,
no sharp bends or kinks, metal connectors);
You can, in certain situations, improve the
digital TV and Radio reception:
■
if you use an outdoor aerial, which is not
obstructed by the metalwork that is used in
the building construction,
■
if you use an active aerial for situations
where you have a long cable between the
aerial and the receiver.
I
F IN DOUBT
Please check with your retailer first in case you
need to upgrade your rooftop or loft aerial.
NOTE
In some parts of the UK, FREEVIEW signals
use a different frequency or transmitter from
your existing analogue service and therefore
it is recommended to fit a so called
“wide band” type of aerial.
6. C
LEANING
1. Switch the receiver to OFF.
2. Wait at least five seconds, to help avoid
possible damage to the receiver’s
electronics.
3. Use a dry, soft and clean lint-free cleaning
cloth to clean the receiver.
4. If you need to use a detergent, make a mild-
soap solution. Other cleaning agents can
cause damage to the outside surface.
a. Make a dry, soft and clean lint-free
cleaning cloth a little damp.
b. Carefully wipe the surface and make sure
that no moisture gets into the receiver.
c. Let the receiver dry on the air.
WARNING
R
ISK OF ELECTRICAL SHOCK
.
R
EMOVE THE MAINS PLUG FROM THE POWER
SUPPLY SOCKET BEFORE YOU CLEAN THE
RECEIVER
. M
AKE SURE
,
IF USED
,
CLEANING
AGENTS CANNOT GET IN THE RECEIVER
.