Chapter 3
•
Vehicular installation
H67706 Revision C
15
The installation kit included with the antenna contains two sets of M5 bolts (60mm
and 70mm), stainless steel washers, plastic spacers and lock nuts. The included
plastic spacers allow the antenna to have sufficient clearance between the bottom
of the radome and the mounting surface. The two different bolt lengths included
are used for different mounting surface thickness, see
Figure 9. Installation using a M5x70 mm
Figure 10. Installation using a M5x60 mm bolt
A dedicated magnet mounting kit (P/N: 3501152-0002) can be used when installing
the antenna onto a car roof. Refer to
Section 3.4
of this document for further
information.