EchoStar DSB-808 2Ci Viaccess, Руководство пользователя, Страница: 55 / 66

Troubleshooting
Section 7
Digital Satellite Receiver
Page 7 - 3
©
2
001
E
c
hoS
tar
Inte
rnati
o
nal
C
o
rp
orat
io
n
A
ll
ri
g
hts
re
s
erved
7
1.4. REMOTE CONTROL UNIT (RCU) RELATED
1.5. INSTALLATION RELATED
Problem Possible cause What to do?
1. Receiver does not
respond to the RCU.
■
Batteries are empty.
■
Insert new batteries.
2. Receiver does some-
times not respond to the
RCU.
■
Direct sun light from
behind the receiver.
■
Close the sun blinds or
get closer to the receiver.
■
You do not aim
sufficiently at the receiver.
■
Aim at the receiver
display.
■
install a RCU extender.
■
Batteries are almost
empty.
■
Insert new batteries.
Problem Possible cause What to do?
1. My television does not
receive any signal from
the receiver (UHF only)
■
You did not select the
correct audio/video
channel on your TV.
■
Refer to the user manual
of the TV for instructions.
■
On the receiver, In the
TV system menu select
the correct channel and
PAL setting.
■
Use another method to
connect the receiver.
2. My television does not
receive any signal from
the receiver
■
You did not select the
correct A/V channel on
your TV.
■
Select the correct A/V
channel on your TV.
■
You did not use a correct
SCART cable.
■
Use only a full featured
SCART cable that is
correctly shielded.
3. My television shows black
areas on the left and right
of the screen.
■
You did not select the
correct aspect ratio for
your TV.
■
On the receiver, in the
user profile menu select
the correct aspect ratio.
4. During (initial) setup of
the receiver, no channels
are found.
■
You did not select the
correct LNB(F).
■
On the receiver, in the
installation setup menu
select the correct LNB(F).
■
When installed, you have
selected the incorrect
switch type or port.
■
On the receiver, in the
installation setup menu
make the correct
selections.
■
You have selected the
incorrect satellite to
search channels on.
■
On the receiver, in the
installation setup menu
select the correct
satellite.
■
You have selected the
incorrect search method.
■
At an initial setup, always
choose the option All.