EchoStar DSB-2200 2Ci Viaccess, Руководство пользователя, Страница: 23 / 72

Familiarization
Section 4
Digital Satellite Receiver
Page 4 - 7
©
2
001
E
c
hoS
tar
Inte
rnati
o
nal
C
o
rp
orat
io
n
A
ll
ri
g
hts
re
s
erved
4
2.1.5. TV SYSTEM PAGE
This menu page allows you to customize the TV settings used for the receiver, you can
customize:
2.2. THE INSTALLATION SETUP MENU
■
The button, that gives you access to the System Setup page (for Fixed dish);
■
The button, that gives you access to the System Setup page (for DiSEqC 1.2);
■
The button, that gives you access to the User LNB Setting page;
■
The button, that gives you access to the About EchoStar information page;
■
The button, that gives you access to the System Upgrade page;
■
The button, that gives you access to the Factory Reset page.
T
HE SIGNAL INDICATOR
In some menus the signal indicator is shown to help you to find a satellite and fine tune for the
best signal level and quality.
■
Channel
To select the (UHF) TV channel to which the
receiver is connected.
■
CH Frequency
To view the frequency that corresponds with the
selected channel. You can not set this option.
■
System
To set the video format supported by your TV.
This main menu has different sub menus that give
access to the pages where you can customize the
settings to match your personal requirements.
Note that the sub menus are dynamic which means
that they change with the selections you make.
The installation setup menu always comes in view with
the system setup sub menu. In the menu bar the
sub menus are shown at the right side. The available
sub menus are shown as icons which become a
highlighted button after selection. The sub menus are
accessible with:
■
The signal indicator
The top bar shows the signal level to indicate that
you receive a signal.
The bottom bar shows the quality of the signal
(signal-to-noise ratio) to indicate that you have a
lock onto the selected transponder.
The bottom text gives the satellite and network
information to which the lock is established.