6
Installation Guide
email - [email protected] (US)
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
email - [email protected] (Europe)
MM-4320-DVR
4.3” Factory Mount Mirror Monitor
with Built-In DVR
General Settings:
Beep
Turns the button press beep on or off.
Clock Settings
Allows you to set the current date and time.
Date Format
Change the displayed format of the date.
Stamp
You can set whether the date and time are permanently
embedded into the recordings.
Language
Choose the language of the menu structure.
Flicker
You can change the flicker rate between 50 and 60 Hz to
improve playback on different devices.
LCD Rotate
This allows you to invert the recording on a vertical plane.
LCD Power Save
This allows you to set the automatic turn-off of the display.
Protect Level
This will allow you to adjust the built in G
sensor settings (lower is less sensitive).
Motion Detection
This will set the camera’s sensitivity to movement when
using the automatic motion detect feature.
Reset Setup
This will reset all settings to the default values.
FW Version
Display the current firmware version on the unit.
Pressing the mode button while in the DVR screen will switch between the Recording,
Photo and Playback modes. Pressing the right-hand arrow button while recording will
mute the built-in microphone. Pressing the menu button while recording will lock the
current file to prevent overwriting.
Operating Instructions
(continued)
Wiring Diagram
+12V Ignition
GND
V1
V 2
Reverse Camera Input
Video Input
Main Harness
(Black)
(Red)