4
5
email - [email protected]
tel - 866-931-8021
email - [email protected]
tel - 866-931-8021
INSTALLATION GUIDE
INSTALLATION PREPARATION INSTRUCTION
INSTALLATION
STEP 1:
STEP 2:
EFS-CA1200
Main Power Installation
Connect the RED wire to (+) 12 Volt constant power or directly to the asset’s
battery.
Ignition Wire
Connect the White ignition wire to a power source that has power when the
assets are turned on and running.
If the asset you are installing on does not have an ignition source available,
you can connect the white ignition wire directly to the vehicle’s battery.
*NOTE: the asset will always report in the application as it is on with no
ignition state updates.
It is important to note that the EFS-CA1200 battery in the device should
be charged before the installation, you can connect the Red power wire
and the Black ground wire to a 12-volt battery for 4 hours or make sure the
Asset you are working on has a fully charged battery.
Chassis Ground
Connect the BLACK (-) Input wire to a solid chassis ground uninhibited
by paint or rust, you mustn’t use any floating grounds from the vehicle’s
electrical system. Always connect the ground wire directly to the assets
chassis and secure the connection with a factory bolt or aftermarket self-
tapping screw..