3
Linking the ERUSB-C to a Receiver
The cubicle controller can send two data telegrams. The button sends a switch
telegram and the sensor which sends an occupancy telegram. Each telegram
must be linked to a receiver separately.
Linking the occupancy sensor
•
Place the receiver in LINK mode, consult the manufactures instructions
if necessary.
•
Press and hold the button on the ERUSB for five (5) seconds. The ERUSB
will transmit the TEACH command for the occupancy sensor.
•
Exit LINK mode
Linking the switch
•
Place the Echoflex receiver in LINK mode, consult the receivers instructions
if necessary.
•
Press the button on the ERUSB once then press and hold for (5) five
seconds, both within seven (7) seconds. The ERUSB will send three (3) PTM
ON commands.
•
Exit LINK mode
