Echoflex Installation Guide
Tunable White Dimming Controller
Corporate Headquarters
Middleton, WI, USA
|
Phone
+1 608 831 4116
Web
|
info@echoflexsolutions.com
|
Support
© 2021 Echoflex Solutions, Inc. Trademark and patent info:
Echoflex intends this document to be provided in its entirety. Product information and specifications subject to change.
8189M2111
Rev A Released 2021-03
Overview
The ELED2 Tunable White
Dimming Controller includes two
output channels of 0-10 V to
control light intensity and color
temperature levels for a single
compatible fixture or an entire
zone. It also supports external
setpoint input from a gateway or
outdoor CCT sensor.
This document covers installation
of ELED2 Tunable White Dimming
Controller models. The
Echoflex
Tunable White Dimming
Controller ELED2 Configuration
Guide
is available for download at
.
The package contents includes the controller and the installation guide.
Prepare for Installation
Echoflex recommends paying special attention to the installation
environment.
• High density construction materials and large metal appliances or
fixtures in the space may disrupt wireless reception.
• Mount the controller to an electrical junction box or a panel in a
location and at a height where it is not subject to tampering by
unauthorized personnel.
Supplies required to install the controller (not provided):
• Appropriately sized wire nuts
• Wire insulation
• Small cable ties
High voltage
model shown
