Echo WT-1610T Скачать руководство пользователя страница 7

Страница: 7 / 24

ENGLISH

WHEELED TRIMMER

SAFETY

1.6 SAFETY DECAL LOCATIONS

Familiarize yourself with all of the safety and operational decals on the machine and the associated hazards. See the

engine owner’s manual or contact the engine manufacturer for engine safety instructions and decals. Make certain that

all safety and operating decals on this machine are kept clean and in good condition. Decals that need replacement

must be applied to their original locations.

Do not operate this equipment in the vicinity of bystanders.

Do not allow children to operate this equipment. Always

stand clear of discharge area when operating this machine.
Keep face and body away from discharge areas.

Do not allow hands or any part of body or clothing near any moving part to avoid serious personal injury.

Obtain and wear safety glasses and use hearing protection at all times when operating this machine.

PN YH653000230

Operation of this equipment may create sparks that can start fires

around dry vegetation. A spark arrestor may be required. The

operator should contact local fire agencies for laws or regulations

relating to fire prevention requirements.

PN YH653000290

Before inspecting or servicing any part of this machine, shut

off power source, disconnect spark plug wire from spark plug

and make sure all moving parts have come to a complete stop.

Keep machine clear of debris and other accumulations. Build up of debris on machine can cause a fire.

PN YH653000240

Содержание WT-1610T

























Результаты поиска

Содержание WT-1610T

Отзывы:

Похожие инструкции для WT-1610T

Бренды по названию

Популярные бренды

Echo WT-1610T, Руководство оператора

Результаты поиска

Содержание WT-1610T

Отзывы:

Похожие инструкции для WT-1610T

Бренды по названию

Популярные бренды