Echo TC-210i, Руководство оператора

Страница: 18 / 24

18
3. Remove bottom left (A) and bottom right (B) screws from cylinder
cover.
4. Carefully pull cylinder cover forward, disengaging muffler gasket
tabs and ignition lead, and lay aside.
5. Use brush to remove dirt from cylinder fins.
IMPORTANT
DO NOT use a metal scraper to remove dirt from the cylinder fins.
6. Assemble components in reverse order.
NOTE
When installing the cylinder cover, be certain the muffler gasket
tabs are locked into the muffler grill slots and the stop switch lead is
seated in the relief notch.
Cylinder Exhaust Port
Level 3.
IMPORTANT
The cylinder exhaust port must be inspected and cleaned of excess
carbon every 3 months or 90 hours of operation in order to maintain
this engine within the emissions durability period. ECHO strongly
recommends that you return your unit to your ECHO dealer for this
important maintenance service.
EXHAUST SYSTEM
Spark Arrestor Screen
Level 2.
Tools Required: Cross Head Screwdriver. 3mm Hex wrench.
Soft metal brush. Wooden carbon scraper.
Parts Required: Spark Arrestor Screen P/N 14586240630,
Gasket P/N 14586642031
1. Remove starter cover and cylinder cover as shown in "Cooling
System Cleaning", pages 17 & 18.
2. Remove screen cover (A), screen holder (B), gasket (C), and spark
arrestor screen (D) from muffler body.
3. Clean carbon deposits from and muffler components.
4. Replace screen if it is cracked, plugged or has holes burned
through.
5. Install with new gaskets.
A
B
A
B
C
D