background image

8

SRM-4300

Stop the engine before leaving the machine, children are not allowed to use the 
machine, stop the machine between different working places.

If you are approached, stop the engine and cutting attachment immediately. 
Keep your hands and body away from silencer to prevent heat injury while the engine 
is hot. 

Shut down immediately if the unit starts to shake or vibrate.

A sudden vibration is a sign there may be dangerous trouble, such as a broken 
fl ywheel, clutch or cutting attachment, or loose parts.

Do not use the unit until the problem has been properly diagnosed and corrected. 

When the unit is turned off, make sure the cutting attachment stops before the unit is 
set down.

A cutting attachment can injure while it continues to spin after the engine is shut off or 
throttle control is released.

If the cutting attachment rotates after throttle is returned to idle, carburettor 
adjustment is required. 
Follow instruction on this Manual to make the adjustment yourself, or have the 
carburettor adjusted by your ECHO dealer.

All maintenance and adjustments given in this Manual should be performed by you or 
your ECHO servicing dealer on a timely basis.

All required service or repair must be done only by ECHO servicing dealer. 
Never attempt to use an incomplete or one fi tted with unauthorized modifi cation.

Always use both hands on the handles. 
Do not operate one-handed.

Always hold the unit with the fi ngers and thumbs encircling the handles. 

Sudden vibration?
Shut down immediately!

Keep feet and hands away 
until rotation stops

Do not operate one-handed

Содержание SRM-4300

























Отзывы: