![background image](http://html1.mh-extra.com/html/echo/srm-2601/srm-2601_operators-manual_4149773032.webp)
32
A
LUBRICATION
Level 1.
Tools Required: 8 mm Open End Wrench, Screwdriver, Clean Rag.
Parts Required: Lithium Base Grease.
Gear Housing
1.
Clean all loose debris from gear box.
2.
Remove plug (A) and check level of grease.
3.
Add grease if necessary, DO NOT over fill.
NYLON
LINE
REPLACEMENT
Level 1.
Tools Required: Head locking tool (if head is to be removed)
Parts Required: ECHO 0.095" Nylon Trimmer Line 12m (40 feet) long.
1.
Hold drum (A) and turn spool (B) CW (clockwise) until it stops.
Pull spool from drum. DO NOT push in on spool when turning.
2.
Use one piece of new nylon line (C) 12m (40 feet) long and thread
through the molded loop (D) on the spool. Pull line tight and
adjust so one end is 15 cm (6 in.) longer than the other.
Содержание SRM - 2601
Страница 37: ...GRASS TRIMMER BRUSH CUTTER OPERATOR S MANUAL 37 NOTES...
Страница 38: ...38 NOTES...
Страница 39: ...GRASS TRIMMER BRUSH CUTTER OPERATOR S MANUAL 39 NOTES...