background image

G

RASS

 T

RIMMER

/B

RUSH

 C

UTTER

O

PERATOR

'

S

 M

ANUAL

13

Plastic/Nylon Blades may be used where ever the nylon line head
is used.  DO NOT use this blade for heavy weeds or brush!

8 Tooth Weed/Grass Blade (P/N 69600120331) is designed for grass,
garden debris and thick weeds.  DO NOT use this blade for brush or
heavy woody growth, 19 mm (3/4 in.) diameter or larger.

80 Tooth Brush Blade (P/N 69500120331) is designed for cutting brush
and woody growth up to 64 mm  (2-1/2 in.) diameter.

22 Tooth Clearing Blade (99944200130) is designed for dense thickets
and saplings up to 64 mm (2-1/2 in.) diameter.

Use Shoulder/Waist Harness (P/N 99944200200) Use of the  Shoulder/
Waist Harness is recommended for ALL Trimmer/Brush Cutter use, not
just Blade operation.  The Shoulder/Waist Harness when used in a
trimming operation with nylon line head suspends the trimmer from the
operator's shoulder and reduces operator fatigue.

During blade operation, the same fatigue reduction is achieved. Safety
to the operator is also enhanced by reducing the possibility of blade
contact with the operator's hands and feet by restricting trimmer
movement.

Содержание SRM-260 - 11-03





























Отзывы: