![background image](http://html1.mh-extra.com/html/echo/srm-230u/srm-230u_operators-manual_4147264021.webp)
G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERATOR
'
S
M
ANUAL
21
AIR
FILTER
Level 1.
Tools required:
Cleaning brush 25 or 50 mm (1 or 2 in.)
Parts required:
90008 REPOWER
TM
AIR & FUEL FILTER KIT.
1.
Close choke (Cold Start Position [
]). This prevents dirt from
entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from air cleaner area.
2.
Remove air filter cover. Brush dirt from inside cover.
3.
Remove air filter and lightly brush debris from filter. Replace filter if
it is damaged, fuel soaked, very dirty, or the rubber sealing edges
are deformed.
4.
If filter can be reused, be certain it:
• Fits tightly in the air filter cavity.
• Is installed with the original side out.
5.
Install air filter cover.
FUEL
FILTER
Level 1.
Tools required:
Fuel line hook, 200-250 mm (8 -10 in.) length of wire
with one end bent into a hook. Clean rag, funnel, and
an approved fuel container.
Parts required:
90008 REPOWER
TM
AIR & FUEL FILTER KIT.
WARNING
DANGER
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling.
1.
Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.
2.
Use the “fuel line hook” to pull the fuel line and filter from the
tank.
3.
Remove the filter from the line and install the new filter.