Echo SRM-210SB Скачать руководство пользователя

Страница: 11 / 32

RASS

RIMMER

RUSH

UTTER

PERATOR

ANUAL

PECIFICATIONS

* Install and use U-Handle when operating any model with steel blade.
**The RPM range shown applies for all attachments. Refer to your attachment Operator's Manual "Specifications"

section for proper RPM specifications.

MODEL ----------------------------------------------------- SRM-210SB

Unit Length ------------------------------------------------- 1770 mm (69.7 in.)

Unit Width -------------------------------------------------- 251 mm (9.9 in.)

Unit Height ------------------------------------------------- 235 mm (9.25 in.)

Weight (dry) w/cutting attachment ---------------------- 4.82 kg (10.62 lb.)

Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine

Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)

Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)

Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)

Exhaust System -------------------------------------------- Spark Arrestor Muffler

Carburetor -------------------------------------------------- Zama Rotary model w/purge

Ignition System -------------------------------------------- CDI (capacitor discharge ignition)

Spark Plug -------------------------------------------------- NGK BPM-8Y Gap 0.65 mm (0.026 in.)

Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)

Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil

Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,

more than 10% ethyl alcohol or 15% MTBE.

Oil ------------------------------------------------------------ Power Blend

Premium Universal 2-Stroke Oil

Fuel Tank Capacity ---------------------------------------- 0.45 lit. (15.2 US fl. oz.)

Starter System ---------------------------------------------- Automatic Recoil Starter

Clutch ------------------------------------------------------- Centrifugal Type

Drive Shaft (upper & lower) ------------------------------ 1/4 in. Flex Shaft

Rotating Direction ----------------------------------------- Counter clockwise viewed from top

Cutting Attachment --------------------------------------- Nylon line head (2-line) with .095 in. Cross Fire

line capacity 6 m

(20 ft.)

Handles* ---------------------------------------------------- Front - Loop, Rear - Grip, when operating with standard line head

Shoulder Harness ------------------------------------------ Optional

Idle Speed (RPM) ------------------------------------------ 2,400 - 3,200

Wide Open Throttle Speed (**RPM) -------------------- 8,000 - 9,000

Содержание SRM-210SB

































Результаты поиска

Содержание SRM-210SB

Отзывы:

Похожие инструкции для SRM-210SB

Бренды по названию

Популярные бренды

Echo SRM-210SB, Руководство оператора

Результаты поиска

Содержание SRM-210SB

Отзывы:

Похожие инструкции для SRM-210SB

Бренды по названию

Популярные бренды