Echo SRM-210 страница 11 Скачать руководство пользователя

Страница: 11 / 32

RASS

RIMMER

RUSH

UTTER

PERATOR

ANUAL

PECIFICATIONS

* Install and use U-Handle when operating any model with blade.

MODEL ----------------------------------------------------- SRM-210

Length ------------------------------------------------------- 1770 mm (69.7 in.)

Width -------------------------------------------------------- 250 mm (9.84 in.)

Height ------------------------------------------------------- 325 mm (12.8 in.)

Weight (dry) w/cutter head ------------------------------- 4.8 kg (10.7 lb.)

Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine

Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)

Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)

Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)

Exhaust ------------------------------------------------------ Spark Arrestor Muffler

Carburetor -------------------------------------------------- Zama model w/purge pump

Ignition System -------------------------------------------- Flywheel magneto, capacitor discharge ignition type

Spark Plug -------------------------------------------------- NGK BPM-8Y Gap 0.65 mm (0.026 in.)

Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)

Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil

Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,

more than 10% ethyl alcohol or 15% MTBE.

Oil ------------------------------------------------------------ Power Blend

Premium Universal 2-Stroke Oil

Fuel Tank Capacity ---------------------------------------- 0.45 lit. (15.2 US fl. oz.)

Recoil Starter System -------------------------------------- Automatic Recoil Starter

Clutch ------------------------------------------------------- Centrifugal Type

Drive Shaft -------------------------------------------------- 1/4 in. Flex Shaft

Rotating Direction ----------------------------------------- Counter-Clockwise viewed from top

Cutter Head ------------------------------------------------- Nylon line head (2-line) with .095 Crossfire™ Line capacity

6m (20 ft.)

Handle* ----------------------------------------------------- Front - Loop and Right Rear Handle w/rubber grips

Shoulder Harness ------------------------------------------ Optional

Idle Speed RPM -------------------------------------------- 2,400 - 3,200

Wide Open Throttle Speed (W.O.T.) RPM ------------- 8,000 - 9,000

Содержание SRM-210

































Результаты поиска

Содержание SRM-210

Отзывы:

Похожие инструкции для SRM-210

Бренды по названию

Популярные бренды

Echo SRM-210, Руководство оператора

Результаты поиска

Содержание SRM-210

Отзывы:

Похожие инструкции для SRM-210

Бренды по названию

Популярные бренды