Echo SHR-170SI, Руководство оператора

Страница: 18 / 108

16
Maintenance and care
Maintenance and care
Servicing guideline
Maintenance and care
check leakage of spray system
1. Close the liquid valve.
2. Put approximately 5 liters of water in the chemical tank.
3. Secure the chemical tank cap.
4. Check the connection between the spray hose, grip, liquid
valve, nozzle pipe, and nozzle to the nipple.
5. Start and warm up the engine.
6. Raise the engine speed and confirm if no water leakage is
occurring.
7. If there is leakage, consult your dealer.
WARNING
Observe the following precautions when checking and maintaining your product after use:
 
Turn the engine off and do not attempt to check or maintain the product until the engine has cooled.
You could burn yourself.

Remove the spark plug cap before performing checks and maintenance.
An accident could occur if the product starts unexpectedly.
IMPORTANT

Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
Area Maintenance Page Before use Monthly Yearly
Spray system Inspect 16 •
Air filter Clean/Replace 17 •
Fuel filter Inspect/Clean/Replace 17 •
Spark plug Inspect/Clean/Adjust/Replace 18 •
Carburettor Inspect/Replace and adjust 17 •
Cooling system Inspect/Clean 18 •
Silencer Inspect/Tighten/Clean 18 •
Starter Inspect - •
Fuel system Inspect 18 •
Screws, bolts and nuts Inspect, Tighten/Replace - •
IMPORTANT

Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.

Record dates of monthly and yearly inspections.
NOTE

It is not necessary to apply grease/oil to pump.
If you have any questions or problems, please contact your dealer.