![background image](http://html1.mh-extra.com/html/echo/rm-4300/rm-4300_operators-manual_4139151015.webp)
15
Description
1.
Angle transmission
- Having two gears to change the
angle of rotating axis.
2.
Shaft tube
- Part of the unit that provides a casing for
power transmission shaft.
3.
Safety decal
- Part number 890617-43130
4.
Front handle
- Handle located towards the cutting
device.
5.
Ignition switch
- Device for connecting and
disconnecting the ignition system and thus allowing the
engine to be started or stopped.
6.
Throttle latch
- Device for temporality setting the throttle
in a partially open position to aid starting.
7.
Throttle trigger
- Activated by the operator's finger for
controlling the engine speed.
8.
Rear handle
- Handle located towards the knapsack
power unit.
9.
Flexible shaft assembly
- Flexible tube for the power
transmission shaft.
10.
Throttle cable
11.
Safety decal
- Part number X505-002310
12.
Air cleaner cover
- Covers air filter.
13.
Spark plug
14.
Fuel tank
- Contains fuel.
15.
Fuel tank cap
- For closing the fuel tank.
16.
Sylinder cover
17.
Shoulder harness
- Used to support unit on operator's
back.
18.
Silencer cover
- Cover the silencer not to make operator
touch to hot surface of silencer.
19.
Operator's Manual
- Included with unit.
Read before operation and keep for future reference to
learn proper, safe operating techniques.
20.
Tools
- 17 x 19 mm socket wrench, screwdriver, span-
ner, 6 mm hexagonal wrench and bar tool.
21.
Goggles
22.
Shield
- Device to protect the operator from accidental
contact with the cutting head and thrown objects.
Shield support and four bolts.
Guard plate
- For nylon
line head.
Device to protect the operator from accidental contact
with the cutting head and thrown objects.
Cut off knife; Cut nylon line to adjust line length to proper
swath.