26
B
E
A
D
F
1. Cut one piece of line to recommended length.
.080 (2.0
mm
)
dia
. – 10’ (3
m
)
.095 (2.4
mm
)
dia
. – 10’ (3
m
)
nylon
lIne
replacement
2. Align arrows on top of knob with openings in eyelets.
3. Insert one end of trimmer line into an eyelet, and push line equal
distance through trimmer head.
6. Install cable. Make sure that the flex cable fully engages into the
clutch square drive socket.
7. Slide coupler on upper drive shaft until fully seated, and align set
screw hole in coupling with hole in upper drive shaft.
8. Install and tighten set screw (D), and tighten clamping screw (C).
nylon
lIne
dIsassembly
InstructIons
NOTE
For normal use, Speed Feed head disassembly is not necessary.
However, if circumstances require disassembly, follow these
instructions.
1. Press top of locking tabs (A) on both sides of Speed Feed head
to release cover (B) from eyelet carrier(C).
2. Remove cover from eyelet carrier.
A
B
C