manualshive.com logo in svg

Echo PPT-2620, Руководство оператора

Поделиться
Скачать
Echo PPT-2620 Скачать руководство пользователя страница 28

OPERATION

PPT-2620

28

X7507820600

© 2/2017 ECHO Inc.

4.

Recoil Starter

Lay the unit on a flat area 
and keep movable 
attachment parts clear of all 
obstacles. Firmly grasp 
throttle handle and throttle 
trigger lockout with left hand 
and fully depress throttle 
trigger to wide open 
position. Rapidly pull recoil 
starter handle/rope (D) until 
engine fires (or maximum 
five [5] pulls).

5.

Choke

After engine fires (or 5 pulls), move choke (B) to the RUN (

) (open) 

position. Firmly grasp throttle handle and throttle trigger lockout with left 
hand and fully depress throttle trigger to wide open position. Pull starter 
handle/rope until engine starts and runs. Release throttle trigger and 
allow unit to warm up at idle for several minutes.

Note:  If engine does not start with choke in “RUN” position after 5 

pulls, repeat instructions 2 - 5.

6.

Throttle Trigger

After engine warm-up, grip throttle handle and support handle. Depress 
the throttle trigger lockout, and gradually depress throttle trigger to 
increase engine RPM to operating speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the 
choke, and do not hold throttle trigger fully depressed.

The attachment should not move at idle, otherwise serious 
personal injury may result.

D

Содержание PPT-2620

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды