![background image](http://html1.mh-extra.com/html/echo/ppt-260-10-05/ppt-260-10-05_operators-manual_4006217019.webp)
P
OWER
P
RUNER
TM
O
PERATOR
'
S
M
ANUAL
19
AIR
FILTER
Level 1.
Tools required:
Cleaning brush 25 or 50 mm (1 or 2 in.)
Parts required:
90030 REPOWER
TM
Air and Fuel Filter Kit
1.
Close choke (Cold Start Position [
]). This prevents dirt from
entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from the air cleaner area.
2.
Remove the air cleaner cover. Clean and inspect the element for
damage. If element is fuel soaked and very dirty, replace.
3.
If element can be cleaned and reused, be certain it:
•properly fits the cavity in the air cleaner cover.
•is installed with the original side out.
NOTE
Carburetor adjustment may be needed after air filter cleaning/
replacement. See Carburetor Adjustment Section.
FUEL
FILTER
Level 1.
Tools required:
200-250 mm (8 - 10 in.) length of wire with one end
bent into a hook, Clean rag, funnel, and an approved
fuel container
Parts Required: 90030 REPOWER
TM
Air and Fuel Filter Kit
WARNING
DANGER
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling or serious personal injury may result.
1.
Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.
2.
Use the “fuel line hook” to pull the fuel line and filter from the tank.
3.
Remove the filter from the line and install the new filter.
Содержание PPT-260 - 10-05
Страница 29: ...POWER PRUNERTM OPERATOR S MANUAL 29 NOTES...
Страница 30: ...30 NOTES...
Страница 31: ...POWER PRUNERTM OPERATOR S MANUAL 31 NOTES...