P
OWER
P
RUNER
TM
O
PERATOR
'
S
M
ANUAL
19
15 m
(50 ft.)
EQUIPMENT
CHECK
Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO
NOT operate unit if leaks are found.
• Check that the cutting attachment is firmly attached and the saw
chain is correctly tensioned on the guide bar. Dull, loose or damaged
saw chain should not be used. Refer to page 29 for correct Filing Saw
Chain procedures.
• Check that shoulder harness is adjusted for safe, comfortable
operation. See figure at right for proper adjustment.
DETERMINE
OPERATION
AREA
• Before starting the unit, equip yourself and fellow workers in the 15 m
(50 ft.) safety zone with the required protective equipment and
clothing.
• Review the area to be trimmed. Look for hazards that could contribute
to unsafe conditions such as overhead electrical lines or dead
branches.
• Spectators, children and animals must be prevented from coming
nearer than 15 m (50 ft.) while the pruner is in use.
