Echo PPT-260 - 01-05, Руководство оператора

Страница: 7 / 32

P
OWER
P
RUNER
TM
O
PERATOR
'
S
M
ANUAL
7
E
MISSION
C
ONTROL
EPA Phase 2
The emission control systems for these engines are EM/TWC
(Engine Modification and Catalyst).
An Emission Control Label is located on the engine. (This is
an EXAMPLE ONLY, information on label varies by engine
FAMILY).
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures
are followed as listed in the Maintenance Section of this manual.
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY : 5EHXS.0254KA DISPLACEMENT : 25.4c
c
EMISSION COMPLIANCE PERIOD: 300 Hours
THIS ENGINE MEETS U.S. EPA PH2 AND 2000 AND LATER
CALIFORNIA EMISSION REGULATIONS FOR S.O.R.E. REFER TO
OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS AND
ADJUSTMENTS.
WARNING DANGER
Kickback can lead to dangerous loss of control of the Power Pruner TM and result in serious injury to the operator or
any one standing close by. Hold the Power Pruner
TM
firmly with both hands with thumbs and fingers encircling the
front and rear handles. Be aware of the down and outward path the pruner will take after the cut is made.
KICKBACK
Kickback may occur when the moving saw chain at the nose or tip of
the guide bar touches an object, or when the wood closes in and
pinches the saw chain in the cut. In some cases this may cause a
lightning-fast reverse action, kicking the guide bar and saw chain up
and back or down and back towards the operator. Either of these
reactions may cause the operator to lose control of the Power Pruner
TM
which could result in serious personal injury.
With a basic understanding of kickback, you can reduce or eliminate the
element of surprise which contributes to accidents.
Avoid contact of the guide bar tip with any object while the saw chain
is moving.
Cut only wood. Avoid striking concrete, metal, wire, or other obstruc-
tions which could cause kickback or damage to the saw chain.
If the saw chain does strike a foreign object, immediately stop the
engine, inspect and repair the Power Pruner
TM
if necessary.