P
OWER
P
RUNER
TM
O
PERATOR
'
S
M
ANUAL
27
A
B
IMPORTANT
Check bar Part Number on your Power Pruner. Chain and guide bar gauge size must be identical. Use Bar/Chain
combinations shown in table above.
Power Pruner B&C Combinations
Bar P/N
Chain P/N
Chain Type
Lin
N
s
Pitch
Gauge
10" regular bar P/N
10A0CD3739
91VXL39CQ
91
39
3/8"
0.050
12" regular bar P/N
12A0CD3744
91VXL44CQ
91
44
3/8"
0.050
SAW
CHAIN
TENSION
ADJUSTMENT
WARNING
Never try to replace or adjust guide bar and saw chain with engine
running. Always disconnect spark plug wire before servicing guide
bar and saw chain. This saw chain is
9(5<VKDUSZHDUKHDY\
gloves to protect your hands when handling it. Wear eye protec-
WLRQPHHWLQJ&(RU$16,VSHFL¿FDWLRQ=
IMPORTANT
Always loosen guide bar nuts before turning the chain tension ad-
MXVWHURWKHUZLVHWKHVSURFNHWFRYHUDQGWHQVLRQHUZLOOEHGDPDJHG
To Adjust Saw Chain Tension
1. Move stop switch to STOP position.
2. Disconnect spark plug lead.
/RRVHQWZRJXLGHEDUQXWV$XQWLO¿QJHUWLJKW
+ROGWKHEDUQRVHXSDQGWXUQWKHDGMXVWHUVFUHZ%FORFNZLVHXQ
-
WLOWKHFKDLQ¿WVVQXJO\DJDLQVWWKHXQGHUVLGHRIWKHEDUDVVKRZQ
Cold Chain Only - turn adjuster screw CW an additional 1/8 - 1/4
turn.
5. Tighten both guide bar nuts with nose held up. Tighten rear nut
¿UVW
6. Pull the chain around the guide bar by hand. Reduce the chain ten-
sion if you feel tight spots.
:KHQFKDLQLVSURSHUO\WHQVLRQHGWLJKWHQJXLGHEDUQXWVVHFXUHO\
IMPORTANT
7LJKWHQJXLGHEDUQXWVWR1PLQOEV'2127
over-tighten nuts. Damage may result.
8. Keep chain properly tensioned at all times.
NOTE
All chains require frequent adjustment.
9. Connect spark plug lead.
Содержание Power Pruner PPT-265ES
Страница 32: ...32 NOTES...
Страница 33: ...POWER PRUNERTM OPERATOR S MANUAL 33 NOTES...
Страница 34: ...34 NOTES...
Страница 35: ...POWER PRUNERTM OPERATOR S MANUAL 35 NOTES...