Echo PE-266S страница 31 Скачать руководство пользователя | Manualshive

Страница: 31 / 36

background image

PE-266/S

WARRANTY STATEMENTS

X7502026302

31

© 3/2013 ECHO Inc.

WARRANTY STATEMENTS

ECHO LIMITED WARRANTY STATEMENT FOR

PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010

ECHO'S RESPONSIBILITY

ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship.
Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace at ECHO’s discretion, any defective product
free of charge at any authorized ECHO servicing dealer within listed below application time periods, limitations and exclusions.

THIS LIMITED

WARRANTY IS ONLY APPLICABLE TO ECHO PRODUCTS SOLD BY AUTHORIZED ECHO DEALERS. IT IS EXTENDED TO THE ORIGINAL

PURCHASER ONLY, AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS.

Repair

parts and accessories replaced under this warranty are warranted only for the balance of the original unit or accessory warranty period. Any
damage caused by improper installation or improper maintenance is not covered by this warranty. All parts or products replaced under warranty
become the property of ECHO, Inc. This warranty is separate from the Emission control warranty statement supplied with your new product.
Please consult the Emission Control Warranty Statement for details regarding emission related parts. For a list of Authorized ECHO Dealers
refer to WWW.ECHO-USA.COM or call

1-800-432-ECHO.

OWNER’S RESPONSIBILITY

To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at WWW.ECHO-USA.COM-

The owner shall demonstrate reasonable care and use, and follow preventative maintenance, storage, fuel and oil usage as prescribed in the
!"#$ %!"#$
dealer for warranty repairs (within the applicable warranty period), and arrange for pick-up or return of your unit after the repairs have been
made. For your nearest authorized ECHO servicing dealer, call ECHO’s Dealer Referral Center, at 1-800-432-ECHO or you can locate an ECHO
servicing dealer at WWW.ECHO-USA.COM. Should you require assistance or have questions concerning ECHO’s Warranty Statement, you
can contact our Consumer Product Support Department at 1-800-673-1558 or contact us through the web at WWW.ECHO-USA.COM.

PRODUCT WARRANTY PERIOD

RESIDENTIAL APPLICATION

&

5 YEAR WARRANTY -

All units for residential, or non-income producing use will be covered by this limited warranty for

from

date of purchase.

EXCEPTIONS:

& '* + / 9"

are warranted for the

of the product on parts only.

& " *

producing use will be covered for failures due to defects in material or workmanship for a period of

from original product

purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by this warranty.

& !"#$ : # ;

manual for string head installation and maintenance instructions.

& < =* >$<99<"#/!?9 !@!

COMMERCIAL APPLICATION

&

1 YEAR WARRANTY -

All Chain Saws, QuikVent Saws, and Cut-Off Saws for commercial, institutional, agricultural, industrial, or income

producing use will be covered by this limited warranty for one

from the date of purchase.

&

2 YEAR WARRANTY -

All other

units for commercial, institutional, agricultural, industrial, or income producing use will be covered by this

limited warranty for two

from the date of purchase.

EXCEPTIONS:

& '* + / 9"

are warranted for the

of the product on parts only.

& "

agricultural, industrial, rental, or income producing will be covered for failures due to defects in material or workmanship for a period
of

from original product purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by

this warranty.

& !"#$ : # ;

manual for string head installation and maintenance instructions.

& < =* >$<99<"#/!?9 !@!

RENTAL APPLICATION - 90 DAYS WARRANTY

&B GJ

!"#$ K: N >$XB"9Y<<?9Z>!@$X section of

this warranty statement for

[\J]

«
...
29
30
31
32
33
...
»

Содержание PE-266S





































Отзывы:

Нет отзывов

Похожие инструкции для PE-266S

Бренд: Femi Страницы: 68

Бренд: Troy-Bilt Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды