background image

6

SAFE

 

OPERATION

Determine Operation Area --

• Review area to be cleared. Look for potential hazards

such as stones or metal objects.

• Spectators and fellow workers must be warned, and

children and animals prevented from coming nearer than
15 m (50 ft.) while the blower is in use.

• Take wind conditions into account: avoid open doors

and windows.

• Provide all operators of this equipment with the

Operator's Manual and instructions for safe operation.

• Do not point blower at people or animals.
• Start unit on ground with throttle at idle.  Check that

blower pipe is not blocked by the ground or by any
objects.

WARNING   

   DANGER

Do not operate this product indoors or in inad-
equately ventilated areas. Engine exhaust contains
poisonous emissions and can cause serious injury or
death.

Keep A Firm Grip
• Hold handle with fingers together encircling the handle.

Keep A Solid Stance
• Maintain footing and balance at all times.  Do not stand

on slippery, uneven or unstable surfaces.  Do not work
in odd positions or on ladders.

• Do not perform Maintenance or Assembly procedures

with engine running.

Noise Control
• Follow local noise regulations on sound levels and

hours of operations. Use only during appropriate hours.

• Never use a higher speed setting then necessary to

perform a task. The higher the engine speed the louder
the blower noise.

• Be a good neighbor.

Avoid Hot Surfaces
• During operation, the muffler or catalytic muffler and

surrounding cover may become extremely hot. Avoid
contact during and immediately after operation. Always
keep exhaust area clear of flammable debris. Allow the
engine and muffler to completely cool before performing
any maintenance activity.

E

MISSION

 C

ONTROL

EPA Phase II

The emission control system for this engine is EM (Engine
Modification).

An Emission Control Label is located on the unit.  (This is
an EXAMPLE ONLY, information on label varies by
engine FAMILY).

PRODUCT  EMISSION  DURABILITY

The 300 hour emission durability period is the time span selected by the manufacturer certifying the engine emissions
output meets applicable California emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.

IMPORTANT ENGINE INFORMATION

ENGINE FAMILY:     1EHXS.0635RA

DISPLACEMENT:    63.3 

CC

THIS ENGINE MEETS U.S. EPA PAHSE II EMISSION

REGULATIONS FOR S.O.R.E.  REFER TO OWNER'S

MANUAL FOR MAINTENANCE SPECIFICATIONS AND

ADJUSTMENTS.  EMISSION COMPLIANCE PERIOD : 300

HRS.

IMPORTANT  This spark ignition system complies with Canadian ICES-002.

Содержание PB-403
























Отзывы: