background image

PB-255LN

SAFETY

X7501186403

13

© 07/22  ECHO Incorporated

Equipment

Use only approved attachments. Serious injury can result from 
the use of a non-approved attachment combination. ECHO 
Incorporated will not be responsible for the failure of cutting 
devices, attachments or accessories which have not been 
tested and approved by ECHO. Read and comply with all safety 
instructions listed in this manual.

Do not attempt to modify this product. Serious injury can 
result from the use of any modified product.

Check unit for loose/missing nuts, bolts, and screws. 
Tighten and/or replace as needed.

Do not use blower if any part is missing or damaged.

Have repairs done only by an authorized service dealer.

Moving parts can amputate fingers or cause severe injuries. 
Keep hands, clothing and loose objects away from all openings.

ALWAYS stop engine, disconnect spark plug, and make 
sure all moving parts have come to a complete stop before 
removing obstructions, clearing debris, or servicing unit.

DO NOT start or operate unit unless all guards and 
protective covers are properly assembled to unit.

NEVER reach into any opening while the engine is running. 
Moving parts might not be visible through openings.

Periodically check fuel system (fuel lines, vent, grommet, fuel 
tank, and fuel cap) for leaks especially if the unit is dropped. If 
damage or leaks are found, do not use unit, otherwise serious 
personal injury or property damage may occur. Have unit 
repaired by an authorized servicing dealer before using.

Содержание PB-255LN









































Отзывы: