14
Before you start
Before you start
Assembly
Install vacuum tube
1. Turn screw anticlockwise until hinged housing cover is free
to open for vacuum tube installation.
2. While holding housing cover open, install vacuum tube into
blower housing with bevel end facing downward.
3. Secure vacuum tube with clamp.
Install debris bag
1. Remove pipe retaining screw from blower housing.Align
grooves in vacuum elbow (A) with pegs (B) on blower hous-
ing and install vacuum elbow.
2. Turn vacuum elbow anticlockwise to lock it into place.
WARNING
Read the operator's manual carefully to ensure that you assemble the product correctly.
Never perform maintenance or assembly procedures with engine running.
!
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
1. Screw
2. Housing cover
1. Vacuum tube
2. Clamp
NOTE
Clamp fits under slotted guide.
1. Screw