MAINTENANCE
PAS-225
40
X7732274303
© 01/2020 ECHO Incorporated
4.
Remove coupler from upper
drive shaft assembly by
loosening clamping screw (C)
and removing set screw (D).
5.
Remove upper flex cable (E),
wipe clean, and apply a thin
coating of 15 ml (0.5 oz.) of
grease.
6.
Install cable. Make sure that the
flex cable fully engages into the
clutch square drive socket.
7.
Slide coupler on upper drive
shaft until fully seated, and
align set screw hole in coupling with hole in upper drive shaft.
8.
Install and tighten set screw (D), and tighten clamping screw (C).
Lubrication
Level 1.
Parts Required: Lithium Based Grease.
Gear Case
Gear cases without grease plug (A) do not require lubrication.
1.
Clean all loose debris from gear
case.
2.
Remove plug (A) and check level
of grease.
3.
Add grease if necessary. DO NOT
over-fill.
C
D
E
A