Sound Source
Use the sound source (2) to select the connection made to the
amplifier.
When a channel is selected a red LED will light (1). Press the
button again and the light will go out showing the channel is off.
The default sound source is Optical. The amplifier will keep the
same input if in stand-by and the red LED (1) will always indicate
the input source. However, if the power is turned off the amplifier
will default to Optical (input 1) and you will have to select the
input again when the power is turned back on.
Headphone Socket
The headphone socket (5) may be used with the headphones but
when using this socket to listen with headphones the sound levels
may be high, especially if no loop wire is connected. Please set the
volume (4) to minimum before use and adjust accordingly.
Remote
The remote control (I) allows the user to operate all the front
panel controls of the amplifier as previously shown. *
In addition, there is also a mute function for the volume. Please
insert drycell batteries (J) into remote before use. Simply remove
battery compartment cover insert batteries and replace cover.
* Source select (2) is NOT adjustable by Remote control.
12
