Echo LC-56V4A, Руководство оператора

Страница: 11 / 22

LC-56V4A
11 99922205810
© 11/2021 ECHO Incorporated
1. Plug the charger into an AC power outlet with the electrical cord (D).
2. Insert the battery (A) into the charger (B).
This is a diagnostic charger. The Charger LED Light (C) will illuminate in
specific order to communicate the current battery status. They are as follows:
CHARGING PROCEDURE (LED
INDICATOR)
LED 1 LED 2
BATTERY IS CHARGING: OFF
GREEN
BLINKING
FULLY CHARGED: OFF GREEN
BATTERY IS TOO WARM:
(REMOVE FOR APPROX. 30
MINUTES TO ALLOW TO COOL)
RED OFF
DEFECTIVE BATTERY:
(REMOVE AND REPLACE WITH
NEW BATTERY IF THIS OCCURS)
RED
BLINKING
OFF
Charging Procedure
OPERATION
OPERATION
Before use charge the battery fully to make sure that the battery can
get the maximum run time. This battery does not have battery memory
and does not need periodic full discharge cycles to prolong life.
D
A
B
C