manualshive.com logo in svg

Echo Instruction Manual, Инструкция по эксплуатации

Поделиться
Скачать
Echo Instruction Manual Скачать руководство пользователя страница 29

29

S

torage

 

after

 

uSe

•  Inspect and adjust every part of the chain saw. 

-  Completely clean every part and repair if neces-

sary.

-  Apply thin coating of oil on metal parts to prevent 

rust.

•  Remove chain and guide bar. 

•  Drain fuel tank completely. Press purge bulb 6 - 7 

times to remove remaining fuel from carburetor then 

drain the tank again. Close choke, start and run the 

engine until it stops due to lack of fuel.

•  Allow engine to cool then remove the spark plug and 

pour 7 cc (1/4 oz.) of fresh, clean, two-stroke engine 

oil into the cylinder through the spark plug hole. 

•  Store in a dry area, free from dust. 

   WARNING

Do not store in an enclosure where fuel fumes 

may accumlate or reach an open flame or spark.

   CAUTION

Do not lend or rent your chain saw without the 

Instruction manual and Safety manual.

NOTE

• For future reference, you should keep this Instruction 

manual and the Safety manual.

• If this Instruction manual or the Safety manual has 

become illegible or is lost, please contact your ECHO 

dealer, or go to www.echo-usa.com.

Содержание Instruction Manual





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды