Echo HCS-3020, Руководство оператора

Страница: 15 / 44

X7702243800 15
© 3/2016 ECHO Inc.
HCS-3020 4020 DESCRIPTION
1. BLADES - Double reciprocating single side blades mounted to a blade
support bar.
2. SUPPORT HANDLE WITH GUARD - FOR RIGHT HAND - Rubber non-
slip grip, guard protects hand from the blades. Warning decals are located
on guard.
3. SPARK PLUG - Provides spark to ignite fuel mixture.
4. PURGE BULB - Pumping purge bulb before starting engine draws fresh
fuel from the fuel tank, purging air from the carburetor. Pump purge bulb
until fuel is visible and flows freely in the clear fuel tank return line. Pump
purge bulb an additional 4 or 5 times.
5. CHOKE - The choke control lever is located on the front of the air cleaner
case. Move choke lever to “COLD START” ( ) to close the choke for
Cold Starting. Move choke lever to “RUN” ( ) position to open choke.
6. AIR CLEANER - Contains replaceable filter element.
7. FUEL TANK CAP - Covers and seals fuel tank opening.
8. FUEL TANK - Contains fuel and fuel filter.
9. THROTTLE HANDLE - FOR LEFT HAND - Contains the Stop Switch,
Throttle Lockout, and Throttle Trigger.
10. THROTTLE TRIGGER - Spring loaded to return to idle when released.
Trigger Lockout must be depressed fully before Throttle Trigger will move.
During acceleration, depress gradually for best operating technique.
11. STOP SWITCH - “TOGGLE SWITCH” located on throttle handle. Move
switch UP to RUN, DOWN to STOP.
12. THROTTLE TRIGGER LOCKOUT - This lever must be depressed before
Throttle Trigger can be activated.
13. SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER
WITH CATALYST -
The muffler controls exhaust noise and emission. The
spark arrestor screen prevents hot, glowing particles of carbon from
leaving the muffler. Keep exhaust area clear of flammable debris.
14. RECOIL STARTER HANDLE - Pull handle slowly until recoil starter
engages, then quickly and firmly. DO NOT pull rope all the way out or allow
the handle to snap back, damage to the starter will occur.
15. BLADE GUARD - Reduces risk of contact with blades and helps guide
material into cutters.
16. DEFLECTOR SHIELD - Sweeps away trimmings as hedge trimmer cuts.