![background image](http://html1.mh-extra.com/html/echo/hca-2620-s/hca-2620-s_operators-manual_4062854012.webp)
SAFETY
HCA-2620/S
12
X7502342203
© 08/20 ECHO Incorporated
Equipment
Use only ECHO attachments. Serious injury may result from the
use of a non-approved attachment combination. ECHO,
INCORPORATED. will not be responsible for the failure of
cutting devices, attachments or accessories which have not
been tested and approved by ECHO, INCORPORATED. Read
and comply with all safety instructions listed in this manual and
safety manual.
◆
Check unit for loose or missing nuts, bolts, and screws.
Tighten and/or replace as needed.
◆
Check that the cutting attachment is firmly attached and in
safe operating condition. Dull, loose or damaged blades
should not be used.
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
◆
ALWAYS stop engine, disconnect spark plug, and make
sure all moving parts have come to a complete stop before
removing obstructions, clearing debris, or servicing unit.
◆
DO NOT start or operate unit unless all guards and
protective covers are properly assembled to unit.
◆
NEVER reach into any opening while the engine is running.
Moving parts may not be visible through openings.
Periodically check fuel system (fuel lines, vent, grommet, fuel
tank, and fuel cap) for leaks especially if the unit is dropped. If
damage or leaks are found, do not use unit, otherwise serious
personal injury or property damage may occur. Have unit
repaired by an authorized servicing dealer before using.